What type of paint to use for a bike frame
up vote
2
down vote
favorite
What's the best type of paint to use for painting bike frames, it's steel if that makes a difference?
I want to do a custom paint job and mix a few colours in a gradient effect. Should I use enamel paid, or an off the shelf car paint etc?
Also what paint should I use for an undercoat, a car primer paint ??
many thanks
paintjob customization
asked Dec 4 at 16:28
Andy Stannard
2156
add a comment |
up vote
2
down vote
favorite
What's the best type of paint to use for painting bike frames, it's steel if that makes a difference?
I want to do a custom paint job and mix a few colours in a gradient effect. Should I use enamel paid, or an off the shelf car paint etc?
Also what paint should I use for an undercoat, a car primer paint ??
many thanks
paintjob customization
asked Dec 4 at 16:28
Andy Stannard
2156
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49
add a comment |
up vote
2
down vote
favorite
up vote
2
down vote
favorite
What's the best type of paint to use for painting bike frames, it's steel if that makes a difference?
I want to do a custom paint job and mix a few colours in a gradient effect. Should I use enamel paid, or an off the shelf car paint etc?
Also what paint should I use for an undercoat, a car primer paint ??
many thanks
paintjob customization
asked Dec 4 at 16:28
Andy Stannard
2156
What's the best type of paint to use for painting bike frames, it's steel if that makes a difference?
I want to do a custom paint job and mix a few colours in a gradient effect. Should I use enamel paid, or an off the shelf car paint etc?
Also what paint should I use for an undercoat, a car primer paint ??
many thanks
paintjob customization
paintjob customization
asked Dec 4 at 16:28
Andy Stannard
2156
asked Dec 4 at 16:28
Andy Stannard
2156
asked Dec 4 at 16:28
Andy Stannard
2156
asked Dec 4 at 16:28
Andy Stannard
2156
asked Dec 4 at 16:28
Andy Stannard
2156
2156
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49
add a comment |
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49
add a comment |
2 Answers
2
active
oldest
votes
up vote
5
down vote
accepted
Basically any paint that could be used on a car will work on a steel bike frame.
The better the paint the more robust it will be. Two-part epoxy based paints or powder coating are probably your best bets, but require specialized equipment. I think there are epoxy paints that do not require curing in an oven but you still need a spray gun.
You can probably use aerosol can paint with a self etching primer, meticulous preparation and good technique.
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
appliance spray paint
– Mazura
Dec 4 at 22:35
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
|
show 1 more comment
up vote
4
down vote
Car paints will work fine, and car primers. There is one brand of paint that comes in rattle-cans and is specifically marketed for repainting bikes.
You could get a powdercoating shop to lay down a base coat--that would probably be inexpensive, and give you a durable protective layer under whatever paint you applied.
answered Dec 4 at 18:55
Adam Rice
5,0391330
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "126"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58372%2fwhat-type-of-paint-to-use-for-a-bike-frame%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
5
down vote
accepted
Basically any paint that could be used on a car will work on a steel bike frame.
The better the paint the more robust it will be. Two-part epoxy based paints or powder coating are probably your best bets, but require specialized equipment. I think there are epoxy paints that do not require curing in an oven but you still need a spray gun.
You can probably use aerosol can paint with a self etching primer, meticulous preparation and good technique.
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
appliance spray paint
– Mazura
Dec 4 at 22:35
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
|
show 1 more comment
up vote
5
down vote
accepted
Basically any paint that could be used on a car will work on a steel bike frame.
The better the paint the more robust it will be. Two-part epoxy based paints or powder coating are probably your best bets, but require specialized equipment. I think there are epoxy paints that do not require curing in an oven but you still need a spray gun.
You can probably use aerosol can paint with a self etching primer, meticulous preparation and good technique.
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
appliance spray paint
– Mazura
Dec 4 at 22:35
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
|
show 1 more comment
up vote
5
down vote
accepted
up vote
5
down vote
accepted
Basically any paint that could be used on a car will work on a steel bike frame.
The better the paint the more robust it will be. Two-part epoxy based paints or powder coating are probably your best bets, but require specialized equipment. I think there are epoxy paints that do not require curing in an oven but you still need a spray gun.
You can probably use aerosol can paint with a self etching primer, meticulous preparation and good technique.
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
Basically any paint that could be used on a car will work on a steel bike frame.
The better the paint the more robust it will be. Two-part epoxy based paints or powder coating are probably your best bets, but require specialized equipment. I think there are epoxy paints that do not require curing in an oven but you still need a spray gun.
You can probably use aerosol can paint with a self etching primer, meticulous preparation and good technique.
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
answered Dec 4 at 18:35
Argenti Apparatus
31.7k23481
31.7k23481
appliance spray paint
– Mazura
Dec 4 at 22:35
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
|
show 1 more comment
appliance spray paint
– Mazura
Dec 4 at 22:35
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
appliance spray paint
– Mazura
Dec 4 at 22:35
appliance spray paint
– Mazura
Dec 4 at 22:35
1
1
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
@Mazura you should make that an answer and explain why you think it would work well for a bike.
– Argenti Apparatus
Dec 4 at 22:51
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
It's epoxy paint in a spray can; you don't need a gun.
– Mazura
Dec 5 at 21:28
1
1
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
@Mazura, Is it really epoxy though?. Two-part epoxy paint is mixed before spraying and then cures by a chemical process (often assisted by an oven). Anything that comes out of a spray can must dry by evaporation of a solvent.
– Argenti Apparatus
Dec 5 at 21:32
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
It says epoxy on the can but I'm not actually sure. Nevermind anyway, it says it's for interior only. However, if I had to choose an aerosol can that would still be it. But no matter what you use the absolute key is meticulous surface preparation.
– Mazura
Dec 5 at 23:34
|
show 1 more comment
up vote
4
down vote
Car paints will work fine, and car primers. There is one brand of paint that comes in rattle-cans and is specifically marketed for repainting bikes.
You could get a powdercoating shop to lay down a base coat--that would probably be inexpensive, and give you a durable protective layer under whatever paint you applied.
answered Dec 4 at 18:55
Adam Rice
5,0391330
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
add a comment |
up vote
4
down vote
Car paints will work fine, and car primers. There is one brand of paint that comes in rattle-cans and is specifically marketed for repainting bikes.
You could get a powdercoating shop to lay down a base coat--that would probably be inexpensive, and give you a durable protective layer under whatever paint you applied.
answered Dec 4 at 18:55
Adam Rice
5,0391330
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
add a comment |
up vote
4
down vote
up vote
4
down vote
Car paints will work fine, and car primers. There is one brand of paint that comes in rattle-cans and is specifically marketed for repainting bikes.
You could get a powdercoating shop to lay down a base coat--that would probably be inexpensive, and give you a durable protective layer under whatever paint you applied.
answered Dec 4 at 18:55
Adam Rice
5,0391330
Car paints will work fine, and car primers. There is one brand of paint that comes in rattle-cans and is specifically marketed for repainting bikes.
You could get a powdercoating shop to lay down a base coat--that would probably be inexpensive, and give you a durable protective layer under whatever paint you applied.
answered Dec 4 at 18:55
Adam Rice
5,0391330
answered Dec 4 at 18:55
Adam Rice
5,0391330
answered Dec 4 at 18:55
Adam Rice
5,0391330
answered Dec 4 at 18:55
Adam Rice
5,0391330
5,0391330
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
add a comment |
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
After the frame has been powder coated, threads, especially the bottom bracket, may need to be recut.
– Carel
Dec 5 at 8:55
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
Excellent point. Probably just chased, not recut, but I agree.
– Adam Rice
Dec 5 at 13:49
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
With proper masking, the threads inside the BB shell should be fine. Facing the shell, sure, but it would need to be a half-assed powdercoating job if you need to chase the threads.
– Gabriel C.
Dec 5 at 14:58
add a comment |
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58372%2fwhat-type-of-paint-to-use-for-a-bike-frame%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Starter: Hardwearing/durable/abrasion resistant, waterproof, oilproof, and compatible with the frame materials.
– Criggie♦
Dec 4 at 17:49