Windows 10 only boots after pressing the reset button
My PC is self-built and has the following components:
- Intel i5 6600K
- Arctic Freezer 33 E-Sports Cooler
- MSI Z170-A
- Radeon Sapphire Nitro RX480 8GB
- Kingston 8GB DDR4 3000 MHZ RAM
- Crucial SSD MX300 120 GB
- WD Blue 500 GB
- Toshiba P300 2TB
Since a few weeks, Windows 10 only boots when I reset the PC, after it was turned off. Restarting is fine. But when the computer was shut down, only a reset will make it boot. It shows the Windows logo, then nothing happens. The dots circling will not appear.
The Windows event log does show the reset as kernel power event, but beyond that, no information is being logged:
My SSD has 87% of life left, according to the Crucial software:
I ran sfc /scannow 2x on an elevated PowerShell and it found a few files that were repaired (probably from the resets), but this didn't solve the issue. A following "turn it off and on again" showed the same symptom.
The only thing I changed recently, was to disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present. The other thing I noticed, is that my wallpaper on the login screen is often gone and only a grey screen is shown instead. Not sure if that has anything to do with.
windows-10 boot
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
|
show 2 more comments
My PC is self-built and has the following components:
- Intel i5 6600K
- Arctic Freezer 33 E-Sports Cooler
- MSI Z170-A
- Radeon Sapphire Nitro RX480 8GB
- Kingston 8GB DDR4 3000 MHZ RAM
- Crucial SSD MX300 120 GB
- WD Blue 500 GB
- Toshiba P300 2TB
Since a few weeks, Windows 10 only boots when I reset the PC, after it was turned off. Restarting is fine. But when the computer was shut down, only a reset will make it boot. It shows the Windows logo, then nothing happens. The dots circling will not appear.
The Windows event log does show the reset as kernel power event, but beyond that, no information is being logged:
My SSD has 87% of life left, according to the Crucial software:
I ran sfc /scannow 2x on an elevated PowerShell and it found a few files that were repaired (probably from the resets), but this didn't solve the issue. A following "turn it off and on again" showed the same symptom.
The only thing I changed recently, was to disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present. The other thing I noticed, is that my wallpaper on the login screen is often gone and only a grey screen is shown instead. Not sure if that has anything to do with.
windows-10 boot
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
1
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still runchkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.
– harrymc
Sep 18 '18 at 19:19
|
show 2 more comments
My PC is self-built and has the following components:
- Intel i5 6600K
- Arctic Freezer 33 E-Sports Cooler
- MSI Z170-A
- Radeon Sapphire Nitro RX480 8GB
- Kingston 8GB DDR4 3000 MHZ RAM
- Crucial SSD MX300 120 GB
- WD Blue 500 GB
- Toshiba P300 2TB
Since a few weeks, Windows 10 only boots when I reset the PC, after it was turned off. Restarting is fine. But when the computer was shut down, only a reset will make it boot. It shows the Windows logo, then nothing happens. The dots circling will not appear.
The Windows event log does show the reset as kernel power event, but beyond that, no information is being logged:
My SSD has 87% of life left, according to the Crucial software:
I ran sfc /scannow 2x on an elevated PowerShell and it found a few files that were repaired (probably from the resets), but this didn't solve the issue. A following "turn it off and on again" showed the same symptom.
The only thing I changed recently, was to disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present. The other thing I noticed, is that my wallpaper on the login screen is often gone and only a grey screen is shown instead. Not sure if that has anything to do with.
windows-10 boot
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
My PC is self-built and has the following components:
- Intel i5 6600K
- Arctic Freezer 33 E-Sports Cooler
- MSI Z170-A
- Radeon Sapphire Nitro RX480 8GB
- Kingston 8GB DDR4 3000 MHZ RAM
- Crucial SSD MX300 120 GB
- WD Blue 500 GB
- Toshiba P300 2TB
Since a few weeks, Windows 10 only boots when I reset the PC, after it was turned off. Restarting is fine. But when the computer was shut down, only a reset will make it boot. It shows the Windows logo, then nothing happens. The dots circling will not appear.
The Windows event log does show the reset as kernel power event, but beyond that, no information is being logged:
My SSD has 87% of life left, according to the Crucial software:
I ran sfc /scannow 2x on an elevated PowerShell and it found a few files that were repaired (probably from the resets), but this didn't solve the issue. A following "turn it off and on again" showed the same symptom.
The only thing I changed recently, was to disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present. The other thing I noticed, is that my wallpaper on the login screen is often gone and only a grey screen is shown instead. Not sure if that has anything to do with.
windows-10 boot
windows-10 boot
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
asked Sep 18 '18 at 17:37
BadSnowflakeBadSnowflake
4881519
4881519
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
1
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still runchkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.
– harrymc
Sep 18 '18 at 19:19
|
show 2 more comments
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
1
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still runchkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.
– harrymc
Sep 18 '18 at 19:19
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
1
1
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still run
chkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.– harrymc
Sep 18 '18 at 19:19
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still run
chkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.– harrymc
Sep 18 '18 at 19:19
|
show 2 more comments
1 Answer
1
active
oldest
votes
This was troubling me for a while, but after changing the power plan to "high performance", it went away. Seems like AMD cards have an issue with restoring their power state on other plans. What exactly caused it I still don't know, but I can shut down and boot now without having to reset.
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1359279%2fwindows-10-only-boots-after-pressing-the-reset-button%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
This was troubling me for a while, but after changing the power plan to "high performance", it went away. Seems like AMD cards have an issue with restoring their power state on other plans. What exactly caused it I still don't know, but I can shut down and boot now without having to reset.
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
add a comment |
This was troubling me for a while, but after changing the power plan to "high performance", it went away. Seems like AMD cards have an issue with restoring their power state on other plans. What exactly caused it I still don't know, but I can shut down and boot now without having to reset.
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
add a comment |
This was troubling me for a while, but after changing the power plan to "high performance", it went away. Seems like AMD cards have an issue with restoring their power state on other plans. What exactly caused it I still don't know, but I can shut down and boot now without having to reset.
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
This was troubling me for a while, but after changing the power plan to "high performance", it went away. Seems like AMD cards have an issue with restoring their power state on other plans. What exactly caused it I still don't know, but I can shut down and boot now without having to reset.
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
answered Jan 8 at 17:44
BadSnowflakeBadSnowflake
4881519
4881519
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
add a comment |
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
1
1
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
Thanks for answering after finding the answer.
– Christopher Hostage
Jan 8 at 18:01
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1359279%2fwindows-10-only-boots-after-pressing-the-reset-button%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I am really not stupid when it comes to IT, but I am really at a loss here guys :D. Any help is appreciated. Fyi, I used Hyper-V for doing some work on Linux and disabled it when I was done.
– BadSnowflake
Sep 18 '18 at 17:37
What do you mean by "disable Hyper-V as a Windows feature. However, the Hyper-V switch is still present" ?
– harrymc
Sep 18 '18 at 18:10
Does Windows boot in safe mode at first attempt? you can try clean boot support.microsoft.com/en-us/help/929135.
– Hardoman
Sep 18 '18 at 18:13
Restore point or backup to go back to?
– SiXandSeven8ths
Sep 18 '18 at 18:30
1
There is no limit to the number of ways in which Windows 10 can self-destruct. The S.M.A.R.T. info is ok, but I would still run
chkdsk. Check also the Event Viewer for errors. Several weeks after is problematic, so all I can suggest if you find nothing is Repair Install Windows 10 with an In-place Upgrade.– harrymc
Sep 18 '18 at 19:19