Confusion regarding exact type and voltage of my laptop RAM module for upgrade
up vote
0
down vote
favorite
I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.
laptop memory
asked Nov 15 at 8:40
Bobby Sha
11
add a comment |
up vote
0
down vote
favorite
I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.
laptop memory
asked Nov 15 at 8:40
Bobby Sha
11
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.
laptop memory
asked Nov 15 at 8:40
Bobby Sha
11
I have a Toshiba satellite laptop C50-A. I am thinking to add more RAM. It has currently a Micron DDR3-1600 Mhz PC3-12800 CL=11 Model 4KTF25664HZ-1G6E1 RAM Module. The confusion is this:
As I know from research DDR3 PC3 Ram runs on 1.5 v. But when I ran CPU-Z it shows my voltage is 1.35v not 1.5 v. And the type of RAM shown is DDR3 on CPUZ not DDR3L.
I ran a system scanner on crucial.com and it recommends an upgrade to DDR3L RAM running at 1.35v.
And RAMMON shows voltage as 1.5v, 1.3v and DDR3.
So my question is my RAM DDR3 running at 1.5 V or DDR3L running at 1.3v.
laptop memory
laptop memory
asked Nov 15 at 8:40
Bobby Sha
11
asked Nov 15 at 8:40
Bobby Sha
11
asked Nov 15 at 8:40
Bobby Sha
11
asked Nov 15 at 8:40
Bobby Sha
11
asked Nov 15 at 8:40
Bobby Sha
11
11
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44
add a comment |
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.
To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.
Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.
All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.
Take this with a grain of salt and consider it suggestions and speculation.
answered Nov 15 at 9:54
Ricardo S.
927
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.
To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.
Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.
All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.
Take this with a grain of salt and consider it suggestions and speculation.
answered Nov 15 at 9:54
Ricardo S.
927
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
add a comment |
up vote
0
down vote
Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.
To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.
Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.
All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.
Take this with a grain of salt and consider it suggestions and speculation.
answered Nov 15 at 9:54
Ricardo S.
927
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
add a comment |
up vote
0
down vote
up vote
0
down vote
Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.
To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.
Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.
All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.
Take this with a grain of salt and consider it suggestions and speculation.
answered Nov 15 at 9:54
Ricardo S.
927
Your best bet for knowing at what voltage your RAM is running at would be your BIOS/UEFI.
To enter your BIOS/UEFI you need to read the prompts that appear right after you press the power-on key on your computer from a power-off state and press the correct one.
Probably F2 or DEL.
Some googling says your current RAM runs at 1.35V and unless you changed your BIOS/UEFI settings and overclocked it, I am inclined to believe this. Could be possible that your MOBO "expects" to run RAM at 1.5V and forces that voltage setting.. But.. That seems less likely to me.
All in all, You are probably running a DD3 RAM at 1.35V and you want your upgrade to be a 2nd RAM kit exactly equal to the first.
Take this with a grain of salt and consider it suggestions and speculation.
answered Nov 15 at 9:54
Ricardo S.
927
answered Nov 15 at 9:54
Ricardo S.
927
answered Nov 15 at 9:54
Ricardo S.
927
answered Nov 15 at 9:54
Ricardo S.
927
927
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
add a comment |
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
Thank you. My BIOS doesnt list RAM voltage.
– Bobby Sha
Nov 15 at 14:30
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
@BobbySha In that case, trust CPU-Z. It's very reliable. Maybe double check with AIDA64.
– Ricardo S.
Nov 15 at 14:35
add a comment |
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1375588%2fconfusion-regarding-exact-type-and-voltage-of-my-laptop-ram-module-for-upgrade%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Simple search gives micron.com/parts/modules/ddr3-sdram/mt4ktf25664hz-1g6 which gives an answer that Your RAM is DDR3L. Which means it can run at 1.35V(which it most likely does in Your notebook). It also supports 1.5V(for those old chipsets, which don't support lower voltage).
– NoAngel
Nov 15 at 10:05
Thank you. My part no shown on various apps I ran says 4KTF25664HZ-1G6E1 without MT prefix shown on the datasheet. Just wondering if it is the same module. I should probably physically check the module.
– Bobby Sha
Nov 15 at 14:34
MT means just Micron Technology. With or without MT it's the same thing.
– NoAngel
Nov 16 at 2:44