How do I fix Manjaro error hibernation device not found on boot?
After installing updates and restarting I got these errors.
ERROR: resume: hibernation device 'UUID=long number here' not found
ERROR: device '/dev/mapper/ManjaroVG-ManjaroRoot' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/mapper/ManjaroVG-ManjaroRoot'.
Then I am dropped to recovery shell with the message SH: can't access tty: job control turned off
.
This is a less than a week old install I checked lvm and luks encryption on the graphical installer.
linux boot arch-linux linux-kernel manjaro
add a comment |
After installing updates and restarting I got these errors.
ERROR: resume: hibernation device 'UUID=long number here' not found
ERROR: device '/dev/mapper/ManjaroVG-ManjaroRoot' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/mapper/ManjaroVG-ManjaroRoot'.
Then I am dropped to recovery shell with the message SH: can't access tty: job control turned off
.
This is a less than a week old install I checked lvm and luks encryption on the graphical installer.
linux boot arch-linux linux-kernel manjaro
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59
add a comment |
After installing updates and restarting I got these errors.
ERROR: resume: hibernation device 'UUID=long number here' not found
ERROR: device '/dev/mapper/ManjaroVG-ManjaroRoot' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/mapper/ManjaroVG-ManjaroRoot'.
Then I am dropped to recovery shell with the message SH: can't access tty: job control turned off
.
This is a less than a week old install I checked lvm and luks encryption on the graphical installer.
linux boot arch-linux linux-kernel manjaro
After installing updates and restarting I got these errors.
ERROR: resume: hibernation device 'UUID=long number here' not found
ERROR: device '/dev/mapper/ManjaroVG-ManjaroRoot' not found. Skipping fsck.
ERROR: Unable to find root device '/dev/mapper/ManjaroVG-ManjaroRoot'.
Then I am dropped to recovery shell with the message SH: can't access tty: job control turned off
.
This is a less than a week old install I checked lvm and luks encryption on the graphical installer.
linux boot arch-linux linux-kernel manjaro
linux boot arch-linux linux-kernel manjaro
asked Dec 16 '15 at 14:46
user5448026user5448026
2814
2814
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59
add a comment |
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59
add a comment |
2 Answers
2
active
oldest
votes
I keep having this problem in Arch Linux and Manjaro, when my Laptop runs out of battery while being in standby.
My solution in Arch is to run:
sudo mkinitcpio -p linux
Under Manjaro you might have to figure out which kernel to use and then run the command adding the specific kernel-version (pick the higher number if two are available), also you might need to restarts until everything behaves normal again:
ls /etc/mkinitcpio.d
sudo mkinitcpio -p linux44 #in my case...
Btw, since the system is not booting anymore if you run into this issue, the fallback-boot in Arch/Manjaro usually helps to start the system in the first place. (if someone was wondering ;-) )
It seems mkinitcpio
resets the boot-process without any side-effects. I would love to here a proper answer and explanation for the issue but for now I am happy to have found a solution.
mkinitcpio is a Bash script used to create an initial ramdisk environment.
Further readings:
- More information about mkinitcpio
- Another useful page
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error:ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
giveslinux414.preset linux419.preset
).
– James Ray
Nov 3 '18 at 5:42
add a comment |
Im my case in Manjaro
from here:
https://forum.manjaro.org/t/error-manjaro-error-hibernation-device-not-found-on-boot/38950/4
In
/etc/fstab
and
/etc/default/grub
I removed the lines with
"UUID=thatnumber_notfound..."
then I used what you say
sudo mkinitcpio.conf -p linux419 (in my case of Manjaro with 4.19)
sudo update-grub
And that eliminate the error of the device not found
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1014212%2fhow-do-i-fix-manjaro-error-hibernation-device-not-found-on-boot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I keep having this problem in Arch Linux and Manjaro, when my Laptop runs out of battery while being in standby.
My solution in Arch is to run:
sudo mkinitcpio -p linux
Under Manjaro you might have to figure out which kernel to use and then run the command adding the specific kernel-version (pick the higher number if two are available), also you might need to restarts until everything behaves normal again:
ls /etc/mkinitcpio.d
sudo mkinitcpio -p linux44 #in my case...
Btw, since the system is not booting anymore if you run into this issue, the fallback-boot in Arch/Manjaro usually helps to start the system in the first place. (if someone was wondering ;-) )
It seems mkinitcpio
resets the boot-process without any side-effects. I would love to here a proper answer and explanation for the issue but for now I am happy to have found a solution.
mkinitcpio is a Bash script used to create an initial ramdisk environment.
Further readings:
- More information about mkinitcpio
- Another useful page
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error:ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
giveslinux414.preset linux419.preset
).
– James Ray
Nov 3 '18 at 5:42
add a comment |
I keep having this problem in Arch Linux and Manjaro, when my Laptop runs out of battery while being in standby.
My solution in Arch is to run:
sudo mkinitcpio -p linux
Under Manjaro you might have to figure out which kernel to use and then run the command adding the specific kernel-version (pick the higher number if two are available), also you might need to restarts until everything behaves normal again:
ls /etc/mkinitcpio.d
sudo mkinitcpio -p linux44 #in my case...
Btw, since the system is not booting anymore if you run into this issue, the fallback-boot in Arch/Manjaro usually helps to start the system in the first place. (if someone was wondering ;-) )
It seems mkinitcpio
resets the boot-process without any side-effects. I would love to here a proper answer and explanation for the issue but for now I am happy to have found a solution.
mkinitcpio is a Bash script used to create an initial ramdisk environment.
Further readings:
- More information about mkinitcpio
- Another useful page
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error:ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
giveslinux414.preset linux419.preset
).
– James Ray
Nov 3 '18 at 5:42
add a comment |
I keep having this problem in Arch Linux and Manjaro, when my Laptop runs out of battery while being in standby.
My solution in Arch is to run:
sudo mkinitcpio -p linux
Under Manjaro you might have to figure out which kernel to use and then run the command adding the specific kernel-version (pick the higher number if two are available), also you might need to restarts until everything behaves normal again:
ls /etc/mkinitcpio.d
sudo mkinitcpio -p linux44 #in my case...
Btw, since the system is not booting anymore if you run into this issue, the fallback-boot in Arch/Manjaro usually helps to start the system in the first place. (if someone was wondering ;-) )
It seems mkinitcpio
resets the boot-process without any side-effects. I would love to here a proper answer and explanation for the issue but for now I am happy to have found a solution.
mkinitcpio is a Bash script used to create an initial ramdisk environment.
Further readings:
- More information about mkinitcpio
- Another useful page
I keep having this problem in Arch Linux and Manjaro, when my Laptop runs out of battery while being in standby.
My solution in Arch is to run:
sudo mkinitcpio -p linux
Under Manjaro you might have to figure out which kernel to use and then run the command adding the specific kernel-version (pick the higher number if two are available), also you might need to restarts until everything behaves normal again:
ls /etc/mkinitcpio.d
sudo mkinitcpio -p linux44 #in my case...
Btw, since the system is not booting anymore if you run into this issue, the fallback-boot in Arch/Manjaro usually helps to start the system in the first place. (if someone was wondering ;-) )
It seems mkinitcpio
resets the boot-process without any side-effects. I would love to here a proper answer and explanation for the issue but for now I am happy to have found a solution.
mkinitcpio is a Bash script used to create an initial ramdisk environment.
Further readings:
- More information about mkinitcpio
- Another useful page
edited Feb 22 '17 at 12:40
Hastur
13.1k53268
13.1k53268
answered Feb 14 '17 at 5:24
Robin at webappcreationsRobin at webappcreations
212
212
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error:ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
giveslinux414.preset linux419.preset
).
– James Ray
Nov 3 '18 at 5:42
add a comment |
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error:ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
giveslinux414.preset linux419.preset
).
– James Ray
Nov 3 '18 at 5:42
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
also this link might help too:
– Robin at webappcreations
Feb 14 '17 at 5:27
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Welcome on SuperUser. Feel you free to edit your post to add reference, change style etc etc... I added some example of formatting, feel you free to roll back or to improve it.
– Hastur
Feb 22 '17 at 12:41
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
Hey Hastur, thanks for the welcome and the formatting :-)
– Robin at webappcreations
Mar 2 '17 at 10:36
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error: ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
gives linux414.preset linux419.preset
).– James Ray
Nov 3 '18 at 5:42
sudo mkinitcpio -p linux419
didn't help for me, I still get the same error: ERROR: resume: hibernation device UUID=8f5d666f-b1bf-48a9-8cce-99bd4842f9f6 not found
. (ls /etc/mkinitcpio.d
gives linux414.preset linux419.preset
).– James Ray
Nov 3 '18 at 5:42
add a comment |
Im my case in Manjaro
from here:
https://forum.manjaro.org/t/error-manjaro-error-hibernation-device-not-found-on-boot/38950/4
In
/etc/fstab
and
/etc/default/grub
I removed the lines with
"UUID=thatnumber_notfound..."
then I used what you say
sudo mkinitcpio.conf -p linux419 (in my case of Manjaro with 4.19)
sudo update-grub
And that eliminate the error of the device not found
add a comment |
Im my case in Manjaro
from here:
https://forum.manjaro.org/t/error-manjaro-error-hibernation-device-not-found-on-boot/38950/4
In
/etc/fstab
and
/etc/default/grub
I removed the lines with
"UUID=thatnumber_notfound..."
then I used what you say
sudo mkinitcpio.conf -p linux419 (in my case of Manjaro with 4.19)
sudo update-grub
And that eliminate the error of the device not found
add a comment |
Im my case in Manjaro
from here:
https://forum.manjaro.org/t/error-manjaro-error-hibernation-device-not-found-on-boot/38950/4
In
/etc/fstab
and
/etc/default/grub
I removed the lines with
"UUID=thatnumber_notfound..."
then I used what you say
sudo mkinitcpio.conf -p linux419 (in my case of Manjaro with 4.19)
sudo update-grub
And that eliminate the error of the device not found
Im my case in Manjaro
from here:
https://forum.manjaro.org/t/error-manjaro-error-hibernation-device-not-found-on-boot/38950/4
In
/etc/fstab
and
/etc/default/grub
I removed the lines with
"UUID=thatnumber_notfound..."
then I used what you say
sudo mkinitcpio.conf -p linux419 (in my case of Manjaro with 4.19)
sudo update-grub
And that eliminate the error of the device not found
answered Dec 23 '18 at 2:39
PabloPablo
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1014212%2fhow-do-i-fix-manjaro-error-hibernation-device-not-found-on-boot%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Were you ever able to resolve this? I am having a similar issue with Antergos currently.
– mblasco
Dec 9 '16 at 20:51
I'm having the same issue, how to resolve it?
– Philip Miglinci
Jan 19 '17 at 8:59