Problems booting Linux via USB 3.0 port on a Dell laptop
I have a problem with booting any live Linux distribution from a USB 3.0 flash drive (Kingston DataTraveler 100 G3 16 GB) on my on Dell Inspiron 7520 laptop running the latest BIOS version (A11).
When I do the same with USB 2.0 flash drive (Philips)—using Universal USB Installer 1.9.5.8 to create bootable USB flash drive—everything works fine. I go into boot manager and choose to boot from USB and it works.
But when I do it with the USB 3.0 flash drive and go into boot manager I don’t see option to boot from that USB 3.0 flash drive but instead it’s detected a a “Diskette Drive.” And when I try to boot from it, then I will see name of Linux distribution on the screen and then it freezes.
I have tried this with several Linux distributions but no success.
linux boot usb usb-flash-drive
add a comment |
I have a problem with booting any live Linux distribution from a USB 3.0 flash drive (Kingston DataTraveler 100 G3 16 GB) on my on Dell Inspiron 7520 laptop running the latest BIOS version (A11).
When I do the same with USB 2.0 flash drive (Philips)—using Universal USB Installer 1.9.5.8 to create bootable USB flash drive—everything works fine. I go into boot manager and choose to boot from USB and it works.
But when I do it with the USB 3.0 flash drive and go into boot manager I don’t see option to boot from that USB 3.0 flash drive but instead it’s detected a a “Diskette Drive.” And when I try to boot from it, then I will see name of Linux distribution on the screen and then it freezes.
I have tried this with several Linux distributions but no success.
linux boot usb usb-flash-drive
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02
add a comment |
I have a problem with booting any live Linux distribution from a USB 3.0 flash drive (Kingston DataTraveler 100 G3 16 GB) on my on Dell Inspiron 7520 laptop running the latest BIOS version (A11).
When I do the same with USB 2.0 flash drive (Philips)—using Universal USB Installer 1.9.5.8 to create bootable USB flash drive—everything works fine. I go into boot manager and choose to boot from USB and it works.
But when I do it with the USB 3.0 flash drive and go into boot manager I don’t see option to boot from that USB 3.0 flash drive but instead it’s detected a a “Diskette Drive.” And when I try to boot from it, then I will see name of Linux distribution on the screen and then it freezes.
I have tried this with several Linux distributions but no success.
linux boot usb usb-flash-drive
I have a problem with booting any live Linux distribution from a USB 3.0 flash drive (Kingston DataTraveler 100 G3 16 GB) on my on Dell Inspiron 7520 laptop running the latest BIOS version (A11).
When I do the same with USB 2.0 flash drive (Philips)—using Universal USB Installer 1.9.5.8 to create bootable USB flash drive—everything works fine. I go into boot manager and choose to boot from USB and it works.
But when I do it with the USB 3.0 flash drive and go into boot manager I don’t see option to boot from that USB 3.0 flash drive but instead it’s detected a a “Diskette Drive.” And when I try to boot from it, then I will see name of Linux distribution on the screen and then it freezes.
I have tried this with several Linux distributions but no success.
linux boot usb usb-flash-drive
linux boot usb usb-flash-drive
edited Dec 9 '17 at 0:37
JakeGould
30.9k1093137
30.9k1093137
asked Jan 9 '15 at 21:55
user1275513
2112
2112
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02
add a comment |
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02
add a comment |
2 Answers
2
active
oldest
votes
Does the USB you created boot on any other computer successfully? Might not have been created properly, see https://help.ubuntu.com/community/Installation/FromUSBStick for other creation strategies, sometimes one doesn't work when another will, same drive & iso.
I prefer the multi-boot USB method described on pendrivelinux.com (they have great windows tools too), or here on ArchWiki.
Or if it does boot ok on other computers, then it's probably a setting somewhere in your BIOS, maybe it's treating USB devices like floppys instead of hard drives. It's not a Windows 8 EFI/UEFI laptop is it? If so see: https://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
Or I've seen some reported problems booting from any USB3, ports might've the problem, I think the USB3 drives would work if plugged into a USB2 port...
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
add a comment |
That seems to be a problem with xHCI support of your live system. It must include the xhci-hcd
kernel module in its initramfs for proper USB3 support, otherwise you will experience a freeze during boot or other strange problems.
There has been a related bug report for Ubuntu.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f862855%2fproblems-booting-linux-via-usb-3-0-port-on-a-dell-laptop%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Does the USB you created boot on any other computer successfully? Might not have been created properly, see https://help.ubuntu.com/community/Installation/FromUSBStick for other creation strategies, sometimes one doesn't work when another will, same drive & iso.
I prefer the multi-boot USB method described on pendrivelinux.com (they have great windows tools too), or here on ArchWiki.
Or if it does boot ok on other computers, then it's probably a setting somewhere in your BIOS, maybe it's treating USB devices like floppys instead of hard drives. It's not a Windows 8 EFI/UEFI laptop is it? If so see: https://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
Or I've seen some reported problems booting from any USB3, ports might've the problem, I think the USB3 drives would work if plugged into a USB2 port...
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
add a comment |
Does the USB you created boot on any other computer successfully? Might not have been created properly, see https://help.ubuntu.com/community/Installation/FromUSBStick for other creation strategies, sometimes one doesn't work when another will, same drive & iso.
I prefer the multi-boot USB method described on pendrivelinux.com (they have great windows tools too), or here on ArchWiki.
Or if it does boot ok on other computers, then it's probably a setting somewhere in your BIOS, maybe it's treating USB devices like floppys instead of hard drives. It's not a Windows 8 EFI/UEFI laptop is it? If so see: https://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
Or I've seen some reported problems booting from any USB3, ports might've the problem, I think the USB3 drives would work if plugged into a USB2 port...
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
add a comment |
Does the USB you created boot on any other computer successfully? Might not have been created properly, see https://help.ubuntu.com/community/Installation/FromUSBStick for other creation strategies, sometimes one doesn't work when another will, same drive & iso.
I prefer the multi-boot USB method described on pendrivelinux.com (they have great windows tools too), or here on ArchWiki.
Or if it does boot ok on other computers, then it's probably a setting somewhere in your BIOS, maybe it's treating USB devices like floppys instead of hard drives. It's not a Windows 8 EFI/UEFI laptop is it? If so see: https://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
Or I've seen some reported problems booting from any USB3, ports might've the problem, I think the USB3 drives would work if plugged into a USB2 port...
Does the USB you created boot on any other computer successfully? Might not have been created properly, see https://help.ubuntu.com/community/Installation/FromUSBStick for other creation strategies, sometimes one doesn't work when another will, same drive & iso.
I prefer the multi-boot USB method described on pendrivelinux.com (they have great windows tools too), or here on ArchWiki.
Or if it does boot ok on other computers, then it's probably a setting somewhere in your BIOS, maybe it's treating USB devices like floppys instead of hard drives. It's not a Windows 8 EFI/UEFI laptop is it? If so see: https://askubuntu.com/questions/221835/installing-ubuntu-on-a-pre-installed-windows-8-64-bit-system-uefi-supported
Or I've seen some reported problems booting from any USB3, ports might've the problem, I think the USB3 drives would work if plugged into a USB2 port...
edited Apr 13 '17 at 12:22
Community♦
1
1
answered Jan 10 '15 at 1:34
Xen2050
9,95431536
9,95431536
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
add a comment |
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Well, I just tried to boot it on another laptop (Lenovo ThinkPad) and it worked without problems. For the BIOS, it's not Win 8 EFI/UEFI. I tried to switch from Legacy to UEFI but no effect. For the USB 2 ports, apparently Inspiron 7520 doesn't have USB 2 port ...
– user1275513
Jan 10 '15 at 9:05
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
Either something mysterious in the BIOS, or it just does not like that usb...
– Xen2050
Jan 10 '15 at 9:49
add a comment |
That seems to be a problem with xHCI support of your live system. It must include the xhci-hcd
kernel module in its initramfs for proper USB3 support, otherwise you will experience a freeze during boot or other strange problems.
There has been a related bug report for Ubuntu.
add a comment |
That seems to be a problem with xHCI support of your live system. It must include the xhci-hcd
kernel module in its initramfs for proper USB3 support, otherwise you will experience a freeze during boot or other strange problems.
There has been a related bug report for Ubuntu.
add a comment |
That seems to be a problem with xHCI support of your live system. It must include the xhci-hcd
kernel module in its initramfs for proper USB3 support, otherwise you will experience a freeze during boot or other strange problems.
There has been a related bug report for Ubuntu.
That seems to be a problem with xHCI support of your live system. It must include the xhci-hcd
kernel module in its initramfs for proper USB3 support, otherwise you will experience a freeze during boot or other strange problems.
There has been a related bug report for Ubuntu.
edited Dec 9 '17 at 0:33
JakeGould
30.9k1093137
30.9k1093137
answered Sep 7 '15 at 19:58
scai
789517
789517
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f862855%2fproblems-booting-linux-via-usb-3-0-port-on-a-dell-laptop%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I would dd the first 100MB of the Stick, and then try to create again.
– davidbaumann
Jan 9 '15 at 22:02