Attempting a fresh install of windows server 2016, stuck in a boot cycle











up vote
1
down vote

favorite












I've been trying to install Windows server 2016 on this server for a while now, the issue I have is that when the USB boot disk is plugged into the server, it goes into a boot cycle where it POST beeps, displays the motherboard screen, and then screen goes black, POST again and repeat. I can't get it to go into BIOS or anything else while the USB is plugged in. As soon as I unplug the USB it stops the cycle and I can navigate BIOS settings. I do not think it is the USB that is bad here because I've been able to successfully install Windows server 2016 on a different machine with the same boot disk. I don't reckon that the hardware is bad either, the machine was running fine with linux mint before I wiped the hard drive and tried installing windows. Here's a few things I've tried:



Popping the CMOS battery



Getting into the boot menu, then plugging in the USB, selecting a boot option and then telling it to restart. I tried this with every option it presented me from the boot menu (HDD, CD-ROM, USB-ZIP External card etc.) and I will also note that no additional options popped up upon plugging in the USB.



I know it recognizes hard drives at least so my next idea was to make a boot disk directly onto a hard drive. This did not work because the hard drive seemed to disappear from my system after creating a partition, formatting and attempting to make it bootable. This is also kind of an issue because the drive I used to try and do that is no longer showing up on my computer (not even in disk manager). I've tried restarting, plugging unplugging my drive dock, turning it off/on but the disk wont show up.



I don't know what else to try at this point so if anyone has any ideas please let me know.



Thanks.










share|improve this question






















  • I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
    – Twisty Impersonator
    Nov 27 at 22:03










  • I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
    – Crubleigh
    Nov 29 at 6:57

















up vote
1
down vote

favorite












I've been trying to install Windows server 2016 on this server for a while now, the issue I have is that when the USB boot disk is plugged into the server, it goes into a boot cycle where it POST beeps, displays the motherboard screen, and then screen goes black, POST again and repeat. I can't get it to go into BIOS or anything else while the USB is plugged in. As soon as I unplug the USB it stops the cycle and I can navigate BIOS settings. I do not think it is the USB that is bad here because I've been able to successfully install Windows server 2016 on a different machine with the same boot disk. I don't reckon that the hardware is bad either, the machine was running fine with linux mint before I wiped the hard drive and tried installing windows. Here's a few things I've tried:



Popping the CMOS battery



Getting into the boot menu, then plugging in the USB, selecting a boot option and then telling it to restart. I tried this with every option it presented me from the boot menu (HDD, CD-ROM, USB-ZIP External card etc.) and I will also note that no additional options popped up upon plugging in the USB.



I know it recognizes hard drives at least so my next idea was to make a boot disk directly onto a hard drive. This did not work because the hard drive seemed to disappear from my system after creating a partition, formatting and attempting to make it bootable. This is also kind of an issue because the drive I used to try and do that is no longer showing up on my computer (not even in disk manager). I've tried restarting, plugging unplugging my drive dock, turning it off/on but the disk wont show up.



I don't know what else to try at this point so if anyone has any ideas please let me know.



Thanks.










share|improve this question






















  • I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
    – Twisty Impersonator
    Nov 27 at 22:03










  • I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
    – Crubleigh
    Nov 29 at 6:57















up vote
1
down vote

favorite









up vote
1
down vote

favorite











I've been trying to install Windows server 2016 on this server for a while now, the issue I have is that when the USB boot disk is plugged into the server, it goes into a boot cycle where it POST beeps, displays the motherboard screen, and then screen goes black, POST again and repeat. I can't get it to go into BIOS or anything else while the USB is plugged in. As soon as I unplug the USB it stops the cycle and I can navigate BIOS settings. I do not think it is the USB that is bad here because I've been able to successfully install Windows server 2016 on a different machine with the same boot disk. I don't reckon that the hardware is bad either, the machine was running fine with linux mint before I wiped the hard drive and tried installing windows. Here's a few things I've tried:



Popping the CMOS battery



Getting into the boot menu, then plugging in the USB, selecting a boot option and then telling it to restart. I tried this with every option it presented me from the boot menu (HDD, CD-ROM, USB-ZIP External card etc.) and I will also note that no additional options popped up upon plugging in the USB.



I know it recognizes hard drives at least so my next idea was to make a boot disk directly onto a hard drive. This did not work because the hard drive seemed to disappear from my system after creating a partition, formatting and attempting to make it bootable. This is also kind of an issue because the drive I used to try and do that is no longer showing up on my computer (not even in disk manager). I've tried restarting, plugging unplugging my drive dock, turning it off/on but the disk wont show up.



I don't know what else to try at this point so if anyone has any ideas please let me know.



Thanks.










share|improve this question













I've been trying to install Windows server 2016 on this server for a while now, the issue I have is that when the USB boot disk is plugged into the server, it goes into a boot cycle where it POST beeps, displays the motherboard screen, and then screen goes black, POST again and repeat. I can't get it to go into BIOS or anything else while the USB is plugged in. As soon as I unplug the USB it stops the cycle and I can navigate BIOS settings. I do not think it is the USB that is bad here because I've been able to successfully install Windows server 2016 on a different machine with the same boot disk. I don't reckon that the hardware is bad either, the machine was running fine with linux mint before I wiped the hard drive and tried installing windows. Here's a few things I've tried:



Popping the CMOS battery



Getting into the boot menu, then plugging in the USB, selecting a boot option and then telling it to restart. I tried this with every option it presented me from the boot menu (HDD, CD-ROM, USB-ZIP External card etc.) and I will also note that no additional options popped up upon plugging in the USB.



I know it recognizes hard drives at least so my next idea was to make a boot disk directly onto a hard drive. This did not work because the hard drive seemed to disappear from my system after creating a partition, formatting and attempting to make it bootable. This is also kind of an issue because the drive I used to try and do that is no longer showing up on my computer (not even in disk manager). I've tried restarting, plugging unplugging my drive dock, turning it off/on but the disk wont show up.



I don't know what else to try at this point so if anyone has any ideas please let me know.



Thanks.







hard-drive boot usb bios windows-server-2016






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Nov 27 at 21:40









Crubleigh

1113




1113












  • I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
    – Twisty Impersonator
    Nov 27 at 22:03










  • I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
    – Crubleigh
    Nov 29 at 6:57




















  • I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
    – Twisty Impersonator
    Nov 27 at 22:03










  • I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
    – Crubleigh
    Nov 29 at 6:57


















I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
– Twisty Impersonator
Nov 27 at 22:03




I'd try another flash drive even though this one worked on another device. Sometimes the simplest explanation is the best.
– Twisty Impersonator
Nov 27 at 22:03












I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
– Crubleigh
Nov 29 at 6:57






I was finally able to go out and get another USB today, and I tried it with the new USB and it worked. Thank you.
– Crubleigh
Nov 29 at 6:57












1 Answer
1






active

oldest

votes

















up vote
0
down vote













It sounds like your flash drive is not working correctly. Even though it was working on another device you should try another flash drive.



(Based on the OP's comments this in fact was the solution.)






share|improve this answer





















    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "3"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1378896%2fattempting-a-fresh-install-of-windows-server-2016-stuck-in-a-boot-cycle%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes








    up vote
    0
    down vote













    It sounds like your flash drive is not working correctly. Even though it was working on another device you should try another flash drive.



    (Based on the OP's comments this in fact was the solution.)






    share|improve this answer

























      up vote
      0
      down vote













      It sounds like your flash drive is not working correctly. Even though it was working on another device you should try another flash drive.



      (Based on the OP's comments this in fact was the solution.)






      share|improve this answer























        up vote
        0
        down vote










        up vote
        0
        down vote









        It sounds like your flash drive is not working correctly. Even though it was working on another device you should try another flash drive.



        (Based on the OP's comments this in fact was the solution.)






        share|improve this answer












        It sounds like your flash drive is not working correctly. Even though it was working on another device you should try another flash drive.



        (Based on the OP's comments this in fact was the solution.)







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Nov 29 at 11:49









        Twisty Impersonator

        17.5k136394




        17.5k136394






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Super User!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.





            Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


            Please pay close attention to the following guidance:


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1378896%2fattempting-a-fresh-install-of-windows-server-2016-stuck-in-a-boot-cycle%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            Сан-Квентин

            8-я гвардейская общевойсковая армия

            Алькесар