Can't unpause network printer











up vote
0
down vote

favorite












Just 2 computers in our workgroup (still works under windows 10).

We have a HP 1102w installed on one computer on a USB port. This works fine from that computer, connected using a USB cable.

An annoyance in Windows 7 was that I had to unpause the printer on the other computer after each reboot to allow printing to occur. Now we are on Windows 10, the Pause Printing option is checked, and greyed out.

I have tried:




  • Uninstall/reinstall

  • checked permissions (Everyone can manage)

  • Drivers from HP (useless - they won't install a shared printer)

  • forced reinstall by using network browse to locate printer


Drive share still works, and i can also access the admin shares (C$, D$, etc)



Any other steps to try?










share|improve this question


























    up vote
    0
    down vote

    favorite












    Just 2 computers in our workgroup (still works under windows 10).

    We have a HP 1102w installed on one computer on a USB port. This works fine from that computer, connected using a USB cable.

    An annoyance in Windows 7 was that I had to unpause the printer on the other computer after each reboot to allow printing to occur. Now we are on Windows 10, the Pause Printing option is checked, and greyed out.

    I have tried:




    • Uninstall/reinstall

    • checked permissions (Everyone can manage)

    • Drivers from HP (useless - they won't install a shared printer)

    • forced reinstall by using network browse to locate printer


    Drive share still works, and i can also access the admin shares (C$, D$, etc)



    Any other steps to try?










    share|improve this question
























      up vote
      0
      down vote

      favorite









      up vote
      0
      down vote

      favorite











      Just 2 computers in our workgroup (still works under windows 10).

      We have a HP 1102w installed on one computer on a USB port. This works fine from that computer, connected using a USB cable.

      An annoyance in Windows 7 was that I had to unpause the printer on the other computer after each reboot to allow printing to occur. Now we are on Windows 10, the Pause Printing option is checked, and greyed out.

      I have tried:




      • Uninstall/reinstall

      • checked permissions (Everyone can manage)

      • Drivers from HP (useless - they won't install a shared printer)

      • forced reinstall by using network browse to locate printer


      Drive share still works, and i can also access the admin shares (C$, D$, etc)



      Any other steps to try?










      share|improve this question













      Just 2 computers in our workgroup (still works under windows 10).

      We have a HP 1102w installed on one computer on a USB port. This works fine from that computer, connected using a USB cable.

      An annoyance in Windows 7 was that I had to unpause the printer on the other computer after each reboot to allow printing to occur. Now we are on Windows 10, the Pause Printing option is checked, and greyed out.

      I have tried:




      • Uninstall/reinstall

      • checked permissions (Everyone can manage)

      • Drivers from HP (useless - they won't install a shared printer)

      • forced reinstall by using network browse to locate printer


      Drive share still works, and i can also access the admin shares (C$, D$, etc)



      Any other steps to try?







      windows-10 network-printer






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Nov 30 '15 at 23:50









      SeanC

      3,27411425




      3,27411425






















          2 Answers
          2






          active

          oldest

          votes

















          up vote
          0
          down vote













          Try Below Steps:




          1. Open Device Manager, uninstall the printer drivers

          2. Shut down computer and Unplug the printer

          3. Start the computer and then plug in the printer

          4. Run Windows Update, because often times those drivers are managed by
            Windows Update

          5. During Windows Updates the driver may be found and re-installed.






          share|improve this answer























          • printer is not attached to my machine
            – SeanC
            Dec 4 '15 at 13:59


















          up vote
          0
          down vote













          Your networking seems ok, as you can connect to the shared drives. So I would check permissions again.



          To pause or resume printing all documents: https://technet.microsoft.com/en-us/library/cc776043%28v=ws.10%29.aspx




          A check mark appears next to Pause Printing when the printer is paused.




          Consistent with legacy behaviour.



          Any setting or option being greyed out though, would lead me to review the permissions aspect again. Have you considered all permissions, including for example, group and local policies or user access control.



          Assigning printer permissions: https://technet.microsoft.com/en-us/library/cc773372%28v=ws.10%29.aspx




          By default, the Manage Printers permission is assigned to members of the Administrators and Power Users groups.




          Carefully going through the page linked immediately above, may help to trouble shoot the policies and network relationship permissions.



          Also see: Group Policy and printing: further down the menu on the Assigning printer permissions link (above).






          share|improve this answer





















            Your Answer








            StackExchange.ready(function() {
            var channelOptions = {
            tags: "".split(" "),
            id: "3"
            };
            initTagRenderer("".split(" "), "".split(" "), channelOptions);

            StackExchange.using("externalEditor", function() {
            // Have to fire editor after snippets, if snippets enabled
            if (StackExchange.settings.snippets.snippetsEnabled) {
            StackExchange.using("snippets", function() {
            createEditor();
            });
            }
            else {
            createEditor();
            }
            });

            function createEditor() {
            StackExchange.prepareEditor({
            heartbeatType: 'answer',
            convertImagesToLinks: true,
            noModals: true,
            showLowRepImageUploadWarning: true,
            reputationToPostImages: 10,
            bindNavPrevention: true,
            postfix: "",
            imageUploader: {
            brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
            contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
            allowUrls: true
            },
            onDemand: true,
            discardSelector: ".discard-answer"
            ,immediatelyShowMarkdownHelp:true
            });


            }
            });














             

            draft saved


            draft discarded


















            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1007411%2fcant-unpause-network-printer%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown

























            2 Answers
            2






            active

            oldest

            votes








            2 Answers
            2






            active

            oldest

            votes









            active

            oldest

            votes






            active

            oldest

            votes








            up vote
            0
            down vote













            Try Below Steps:




            1. Open Device Manager, uninstall the printer drivers

            2. Shut down computer and Unplug the printer

            3. Start the computer and then plug in the printer

            4. Run Windows Update, because often times those drivers are managed by
              Windows Update

            5. During Windows Updates the driver may be found and re-installed.






            share|improve this answer























            • printer is not attached to my machine
              – SeanC
              Dec 4 '15 at 13:59















            up vote
            0
            down vote













            Try Below Steps:




            1. Open Device Manager, uninstall the printer drivers

            2. Shut down computer and Unplug the printer

            3. Start the computer and then plug in the printer

            4. Run Windows Update, because often times those drivers are managed by
              Windows Update

            5. During Windows Updates the driver may be found and re-installed.






            share|improve this answer























            • printer is not attached to my machine
              – SeanC
              Dec 4 '15 at 13:59













            up vote
            0
            down vote










            up vote
            0
            down vote









            Try Below Steps:




            1. Open Device Manager, uninstall the printer drivers

            2. Shut down computer and Unplug the printer

            3. Start the computer and then plug in the printer

            4. Run Windows Update, because often times those drivers are managed by
              Windows Update

            5. During Windows Updates the driver may be found and re-installed.






            share|improve this answer














            Try Below Steps:




            1. Open Device Manager, uninstall the printer drivers

            2. Shut down computer and Unplug the printer

            3. Start the computer and then plug in the printer

            4. Run Windows Update, because often times those drivers are managed by
              Windows Update

            5. During Windows Updates the driver may be found and re-installed.







            share|improve this answer














            share|improve this answer



            share|improve this answer








            edited Dec 4 '15 at 3:42









            Jatin

            381211




            381211










            answered Dec 4 '15 at 2:30









            the original mike western

            1,096158




            1,096158












            • printer is not attached to my machine
              – SeanC
              Dec 4 '15 at 13:59


















            • printer is not attached to my machine
              – SeanC
              Dec 4 '15 at 13:59
















            printer is not attached to my machine
            – SeanC
            Dec 4 '15 at 13:59




            printer is not attached to my machine
            – SeanC
            Dec 4 '15 at 13:59












            up vote
            0
            down vote













            Your networking seems ok, as you can connect to the shared drives. So I would check permissions again.



            To pause or resume printing all documents: https://technet.microsoft.com/en-us/library/cc776043%28v=ws.10%29.aspx




            A check mark appears next to Pause Printing when the printer is paused.




            Consistent with legacy behaviour.



            Any setting or option being greyed out though, would lead me to review the permissions aspect again. Have you considered all permissions, including for example, group and local policies or user access control.



            Assigning printer permissions: https://technet.microsoft.com/en-us/library/cc773372%28v=ws.10%29.aspx




            By default, the Manage Printers permission is assigned to members of the Administrators and Power Users groups.




            Carefully going through the page linked immediately above, may help to trouble shoot the policies and network relationship permissions.



            Also see: Group Policy and printing: further down the menu on the Assigning printer permissions link (above).






            share|improve this answer

























              up vote
              0
              down vote













              Your networking seems ok, as you can connect to the shared drives. So I would check permissions again.



              To pause or resume printing all documents: https://technet.microsoft.com/en-us/library/cc776043%28v=ws.10%29.aspx




              A check mark appears next to Pause Printing when the printer is paused.




              Consistent with legacy behaviour.



              Any setting or option being greyed out though, would lead me to review the permissions aspect again. Have you considered all permissions, including for example, group and local policies or user access control.



              Assigning printer permissions: https://technet.microsoft.com/en-us/library/cc773372%28v=ws.10%29.aspx




              By default, the Manage Printers permission is assigned to members of the Administrators and Power Users groups.




              Carefully going through the page linked immediately above, may help to trouble shoot the policies and network relationship permissions.



              Also see: Group Policy and printing: further down the menu on the Assigning printer permissions link (above).






              share|improve this answer























                up vote
                0
                down vote










                up vote
                0
                down vote









                Your networking seems ok, as you can connect to the shared drives. So I would check permissions again.



                To pause or resume printing all documents: https://technet.microsoft.com/en-us/library/cc776043%28v=ws.10%29.aspx




                A check mark appears next to Pause Printing when the printer is paused.




                Consistent with legacy behaviour.



                Any setting or option being greyed out though, would lead me to review the permissions aspect again. Have you considered all permissions, including for example, group and local policies or user access control.



                Assigning printer permissions: https://technet.microsoft.com/en-us/library/cc773372%28v=ws.10%29.aspx




                By default, the Manage Printers permission is assigned to members of the Administrators and Power Users groups.




                Carefully going through the page linked immediately above, may help to trouble shoot the policies and network relationship permissions.



                Also see: Group Policy and printing: further down the menu on the Assigning printer permissions link (above).






                share|improve this answer












                Your networking seems ok, as you can connect to the shared drives. So I would check permissions again.



                To pause or resume printing all documents: https://technet.microsoft.com/en-us/library/cc776043%28v=ws.10%29.aspx




                A check mark appears next to Pause Printing when the printer is paused.




                Consistent with legacy behaviour.



                Any setting or option being greyed out though, would lead me to review the permissions aspect again. Have you considered all permissions, including for example, group and local policies or user access control.



                Assigning printer permissions: https://technet.microsoft.com/en-us/library/cc773372%28v=ws.10%29.aspx




                By default, the Manage Printers permission is assigned to members of the Administrators and Power Users groups.




                Carefully going through the page linked immediately above, may help to trouble shoot the policies and network relationship permissions.



                Also see: Group Policy and printing: further down the menu on the Assigning printer permissions link (above).







                share|improve this answer












                share|improve this answer



                share|improve this answer










                answered Dec 9 '15 at 2:18









                doncoyote

                1




                1






























                     

                    draft saved


                    draft discarded



















































                     


                    draft saved


                    draft discarded














                    StackExchange.ready(
                    function () {
                    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1007411%2fcant-unpause-network-printer%23new-answer', 'question_page');
                    }
                    );

                    Post as a guest















                    Required, but never shown





















































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown

































                    Required, but never shown














                    Required, but never shown












                    Required, but never shown







                    Required, but never shown







                    Popular posts from this blog

                    Сан-Квентин

                    Алькесар

                    Josef Freinademetz