forest, changing `s sep` such that it is at each second end node larger?
4
The following MWE generate a tree diagram (using the forest package) as I like to have:
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep= 1 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
I wonder, if it is possible to obtain the same result without inserting phantom nodes? Also I will appreciate any improvements of the my MWE code.
addendum: one way is insert manually s sep as is done code below:
[Start,s sep=4mm
[A, EL=leq 0.5,s sep=4mm
[A1, EL=leq 0.3,s sep=1mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3,s sep=1mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5,s sep=4mm
[B1, EL=leq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
considering above solution the question is now: is possible to write a code in fortree preamble, which will replace tose manulaly inserted s sep=...?
forest
asked 6 hours ago
ZarkoZarko
128k868167
add a comment |
4
The following MWE generate a tree diagram (using the forest package) as I like to have:
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep= 1 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
I wonder, if it is possible to obtain the same result without inserting phantom nodes? Also I will appreciate any improvements of the my MWE code.
addendum: one way is insert manually s sep as is done code below:
[Start,s sep=4mm
[A, EL=leq 0.5,s sep=4mm
[A1, EL=leq 0.3,s sep=1mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3,s sep=1mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5,s sep=4mm
[B1, EL=leq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
considering above solution the question is now: is possible to write a code in fortree preamble, which will replace tose manulaly inserted s sep=...?
forest
asked 6 hours ago
ZarkoZarko
128k868167
add a comment |
4
4
4
The following MWE generate a tree diagram (using the forest package) as I like to have:
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep= 1 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
I wonder, if it is possible to obtain the same result without inserting phantom nodes? Also I will appreciate any improvements of the my MWE code.
addendum: one way is insert manually s sep as is done code below:
[Start,s sep=4mm
[A, EL=leq 0.5,s sep=4mm
[A1, EL=leq 0.3,s sep=1mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3,s sep=1mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5,s sep=4mm
[B1, EL=leq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
considering above solution the question is now: is possible to write a code in fortree preamble, which will replace tose manulaly inserted s sep=...?
forest
asked 6 hours ago
ZarkoZarko
128k868167
The following MWE generate a tree diagram (using the forest package) as I like to have:
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep= 1 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
I wonder, if it is possible to obtain the same result without inserting phantom nodes? Also I will appreciate any improvements of the my MWE code.
addendum: one way is insert manually s sep as is done code below:
[Start,s sep=4mm
[A, EL=leq 0.5,s sep=4mm
[A1, EL=leq 0.3,s sep=1mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3,s sep=1mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5,s sep=4mm
[B1, EL=leq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3,s sep=1mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
considering above solution the question is now: is possible to write a code in fortree preamble, which will replace tose manulaly inserted s sep=...?
forest
forest
asked 6 hours ago
ZarkoZarko
128k868167
asked 6 hours ago
ZarkoZarko
128k868167
edited 4 hours ago
Zarko
asked 6 hours ago
ZarkoZarko
128k868167
asked 6 hours ago
ZarkoZarko
128k868167
asked 6 hours ago
ZarkoZarko
128k868167
128k868167
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
3
Yes. Use s sep+.
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep+=2mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3,s sep+=-3mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3,s sep+=-3mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
And I had this on my machine before Zarko pinged me. (I didn't think it is worthwhile to add an update for it.)
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
s sep=4mm,
l sep=13 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
},
where level=2{s sep+=-1mm}{s sep+=0.5mm}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
answered 4 hours ago
marmotmarmot
112k5144270
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller betweenA11andA12and bigger betweenA21andA22, etc.
– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after readingforestdocumentation again (and again) i figured out solution which i like to have: from your code i remove alls sep+=-3mmfrom nodes on the second level and tofortreeadd optionwhere level=2{s sep+=-1mm}{}. it works fine.
– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.where level=2{s sep+=...}{s sep+=...}but with other dimensions.
– marmot
2 hours ago
add a comment |
2
Just for record. With help of nice @marmot answer and after reading forest documentation again (and again) i figured out the solution which i looked for:
documentclass[border=3mm, preview]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesizesffamily, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "ELS=east"
pos=0.6}
}
begin{forest}
for tree={
draw,
semithick,
% fill=orange!20,
parent anchor=children,
l sep=13 mm,
s sep=4mm,
where level=2{s sep=1mm}{}
},
EL/.style = {
before typesetting nodes={%
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
] end{forest}
end{document}
which gives desired result:
answered 2 hours ago
ZarkoZarko
128k868167
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481967%2fforest-changing-s-sep-such-that-it-is-at-each-second-end-node-larger%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
3
Yes. Use s sep+.
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep+=2mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3,s sep+=-3mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3,s sep+=-3mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
And I had this on my machine before Zarko pinged me. (I didn't think it is worthwhile to add an update for it.)
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
s sep=4mm,
l sep=13 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
},
where level=2{s sep+=-1mm}{s sep+=0.5mm}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
answered 4 hours ago
marmotmarmot
112k5144270
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller betweenA11andA12and bigger betweenA21andA22, etc.
– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after readingforestdocumentation again (and again) i figured out solution which i like to have: from your code i remove alls sep+=-3mmfrom nodes on the second level and tofortreeadd optionwhere level=2{s sep+=-1mm}{}. it works fine.
– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.where level=2{s sep+=...}{s sep+=...}but with other dimensions.
– marmot
2 hours ago
add a comment |
3
Yes. Use s sep+.
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep+=2mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3,s sep+=-3mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3,s sep+=-3mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
And I had this on my machine before Zarko pinged me. (I didn't think it is worthwhile to add an update for it.)
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
s sep=4mm,
l sep=13 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
},
where level=2{s sep+=-1mm}{s sep+=0.5mm}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
answered 4 hours ago
marmotmarmot
112k5144270
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller betweenA11andA12and bigger betweenA21andA22, etc.
– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after readingforestdocumentation again (and again) i figured out solution which i like to have: from your code i remove alls sep+=-3mmfrom nodes on the second level and tofortreeadd optionwhere level=2{s sep+=-1mm}{}. it works fine.
– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.where level=2{s sep+=...}{s sep+=...}but with other dimensions.
– marmot
2 hours ago
add a comment |
3
3
3
Yes. Use s sep+.
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep+=2mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3,s sep+=-3mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3,s sep+=-3mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
And I had this on my machine before Zarko pinged me. (I didn't think it is worthwhile to add an update for it.)
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
s sep=4mm,
l sep=13 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
},
where level=2{s sep+=-1mm}{s sep+=0.5mm}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
answered 4 hours ago
marmotmarmot
112k5144270
Yes. Use s sep+.
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
l sep=13 mm,
s sep+=2mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3,s sep+=-3mm
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3,s sep+=-3mm
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3,s sep+=-3mm
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
And I had this on my machine before Zarko pinged me. (I didn't think it is worthwhile to add an update for it.)
documentclass[border=3mm]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesize, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "EL=east"
pos=0.6}
}
newcommandEL{edge label}
begin{forest}
for tree={
draw, semithick,
parent anchor=children,
s sep=4mm,
l sep=13 mm,
anchor=parent,% <--- work around alignment issue
},
EL/.style = {
before typesetting nodes={%% <--- work around edge labels positioning
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
},
where level=2{s sep+=-1mm}{s sep+=0.5mm}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
%[,phantom,fit=band] % <---
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
%[,phantom,fit=band] % <---
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
]
end{forest}
end{document}
answered 4 hours ago
marmotmarmot
112k5144270
edited 1 hour ago
answered 4 hours ago
marmotmarmot
112k5144270
answered 4 hours ago
marmotmarmot
112k5144270
answered 4 hours ago
marmotmarmot
112k5144270
112k5144270
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller betweenA11andA12and bigger betweenA21andA22, etc.
– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after readingforestdocumentation again (and again) i figured out solution which i like to have: from your code i remove alls sep+=-3mmfrom nodes on the second level and tofortreeadd optionwhere level=2{s sep+=-1mm}{}. it works fine.
– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.where level=2{s sep+=...}{s sep+=...}but with other dimensions.
– marmot
2 hours ago
add a comment |
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller betweenA11andA12and bigger betweenA21andA22, etc.
– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after readingforestdocumentation again (and again) i figured out solution which i like to have: from your code i remove alls sep+=-3mmfrom nodes on the second level and tofortreeadd optionwhere level=2{s sep+=-1mm}{}. it works fine.
– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.where level=2{s sep+=...}{s sep+=...}but with other dimensions.
– marmot
2 hours ago
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by
% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller between A11 and A12 and bigger between A21 and A22, etc.– Zarko
4 hours ago
thank you very much for answer. apparently my question is not clear enough. i like to obtain in question showed image with removed ˙phantom` nodes (indicated by
% <---). as i see, in your suggestion the distances between nodes at level 0 are equal. i like to have smaller between A11 and A12 and bigger between A21 and A22, etc.– Zarko
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
@Zarko Sorry, didn't read carefully. Better now?
– marmot
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
yes, that is. i need to check how you achieve this :-)
– Zarko
4 hours ago
with help of your answer and after reading
forest documentation again (and again) i figured out solution which i like to have: from your code i remove all s sep+=-3mm from nodes on the second level and to fortree add option where level=2{s sep+=-1mm}{}. it works fine.– Zarko
2 hours ago
with help of your answer and after reading
forest documentation again (and again) i figured out solution which i like to have: from your code i remove all s sep+=-3mm from nodes on the second level and to fortree add option where level=2{s sep+=-1mm}{}. it works fine.– Zarko
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.
where level=2{s sep+=...}{s sep+=...} but with other dimensions.– marmot
2 hours ago
@Zarko Yes, I have almost the same thing on my machine.
where level=2{s sep+=...}{s sep+=...} but with other dimensions.– marmot
2 hours ago
add a comment |
2
Just for record. With help of nice @marmot answer and after reading forest documentation again (and again) i figured out the solution which i looked for:
documentclass[border=3mm, preview]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesizesffamily, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "ELS=east"
pos=0.6}
}
begin{forest}
for tree={
draw,
semithick,
% fill=orange!20,
parent anchor=children,
l sep=13 mm,
s sep=4mm,
where level=2{s sep=1mm}{}
},
EL/.style = {
before typesetting nodes={%
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
] end{forest}
end{document}
which gives desired result:
answered 2 hours ago
ZarkoZarko
128k868167
add a comment |
2
Just for record. With help of nice @marmot answer and after reading forest documentation again (and again) i figured out the solution which i looked for:
documentclass[border=3mm, preview]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesizesffamily, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "ELS=east"
pos=0.6}
}
begin{forest}
for tree={
draw,
semithick,
% fill=orange!20,
parent anchor=children,
l sep=13 mm,
s sep=4mm,
where level=2{s sep=1mm}{}
},
EL/.style = {
before typesetting nodes={%
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
] end{forest}
end{document}
which gives desired result:
answered 2 hours ago
ZarkoZarko
128k868167
add a comment |
2
2
2
Just for record. With help of nice @marmot answer and after reading forest documentation again (and again) i figured out the solution which i looked for:
documentclass[border=3mm, preview]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesizesffamily, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "ELS=east"
pos=0.6}
}
begin{forest}
for tree={
draw,
semithick,
% fill=orange!20,
parent anchor=children,
l sep=13 mm,
s sep=4mm,
where level=2{s sep=1mm}{}
},
EL/.style = {
before typesetting nodes={%
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
] end{forest}
end{document}
which gives desired result:
answered 2 hours ago
ZarkoZarko
128k868167
Just for record. With help of nice @marmot answer and after reading forest documentation again (and again) i figured out the solution which i looked for:
documentclass[border=3mm, preview]{standalone}
usepackage{forest}
begin{document}
tikzset{ELS/.style={% Edge Label Style
font=footnotesizesffamily, inner sep=2pt,
anchor=south #1, % label position: "ELS=west" or "ELS=east"
pos=0.6}
}
begin{forest}
for tree={
draw,
semithick,
% fill=orange!20,
parent anchor=children,
l sep=13 mm,
s sep=4mm,
where level=2{s sep=1mm}{}
},
EL/.style = {
before typesetting nodes={%
where n=1{%
edge label/.wrap value={node[ELS=east]{$#1$}}
}{%
edge label/.wrap value={node[ELS=west]{$#1$}}
}
}
}
[Start
[A, EL=leq 0.5
[A1, EL=leq 0.3
[A11, EL=leq 0.7]
[A12, EL=geq 0.7]
]
[A2, EL=geq 0.3
[A21, EL=leq 0.7]
[A22, EL=geq 0.7]
]
]
[B, EL=geq 0.5
[B1, EL=leq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
[B2, EL=geq 0.3
[B11, EL=leq 0.7]
[B12, EL=geq 0.7]
]
]
] end{forest}
end{document}
which gives desired result:
answered 2 hours ago
ZarkoZarko
128k868167
edited 1 hour ago
answered 2 hours ago
ZarkoZarko
128k868167
answered 2 hours ago
ZarkoZarko
128k868167
answered 2 hours ago
ZarkoZarko
128k868167
128k868167
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f481967%2fforest-changing-s-sep-such-that-it-is-at-each-second-end-node-larger%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
