Displaying files and increment them +1
I'm creating a script that lists all the nano files in a directory. han than the files are added with a number. (Adding +1 for every file). Then the user is allowed to view the nano file.
Here is what I have so far. I want to point out that all the filenames end with _log so that's why I'm hoping that the grep works like this.
path=~/home/folder/list
list=$(`ls $path | grep -i *_log`)
printf '%sn' "${list[@]}" | nl -v 1
read -p "Number of file to be displayed:" numb
sudo cat $path/${list [numb]}
bash shell-script
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I'm creating a script that lists all the nano files in a directory. han than the files are added with a number. (Adding +1 for every file). Then the user is allowed to view the nano file.
Here is what I have so far. I want to point out that all the filenames end with _log so that's why I'm hoping that the grep works like this.
path=~/home/folder/list
list=$(`ls $path | grep -i *_log`)
printf '%sn' "${list[@]}" | nl -v 1
read -p "Number of file to be displayed:" numb
sudo cat $path/${list [numb]}
bash shell-script
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I'm creating a script that lists all the nano files in a directory. han than the files are added with a number. (Adding +1 for every file). Then the user is allowed to view the nano file.
Here is what I have so far. I want to point out that all the filenames end with _log so that's why I'm hoping that the grep works like this.
path=~/home/folder/list
list=$(`ls $path | grep -i *_log`)
printf '%sn' "${list[@]}" | nl -v 1
read -p "Number of file to be displayed:" numb
sudo cat $path/${list [numb]}
bash shell-script
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I'm creating a script that lists all the nano files in a directory. han than the files are added with a number. (Adding +1 for every file). Then the user is allowed to view the nano file.
Here is what I have so far. I want to point out that all the filenames end with _log so that's why I'm hoping that the grep works like this.
path=~/home/folder/list
list=$(`ls $path | grep -i *_log`)
printf '%sn' "${list[@]}" | nl -v 1
read -p "Number of file to be displayed:" numb
sudo cat $path/${list [numb]}
bash shell-script
bash shell-script
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
edited Dec 31 '18 at 9:22
terdon♦
128k31249423
128k31249423
asked Dec 31 '18 at 9:03
User101
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked Dec 31 '18 at 9:03
User101
254
asked Dec 31 '18 at 9:03
User101
254
254
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
User101 is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
If I understand correctly, you want to make an array holding all the files and then display the contents of whichever file corresponds to the number entered by the user. If so, you are making things far more complicated than necessary. This should be enough:
## Get the files into the array $list
list=(/home/folder/list/*_log)
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]}";
done
## Get the user input
read -p "Number of file to be displayed:" numb
## display the file (don't use sudo unless absolutely necessary)
cat "${list[numb]}"
Note that this will display the file names including the entire path. To display the names only, change the for loop to:
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]##*/}"
done
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
User101 is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f491721%2fdisplaying-files-and-increment-them-1%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
If I understand correctly, you want to make an array holding all the files and then display the contents of whichever file corresponds to the number entered by the user. If so, you are making things far more complicated than necessary. This should be enough:
## Get the files into the array $list
list=(/home/folder/list/*_log)
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]}";
done
## Get the user input
read -p "Number of file to be displayed:" numb
## display the file (don't use sudo unless absolutely necessary)
cat "${list[numb]}"
Note that this will display the file names including the entire path. To display the names only, change the for loop to:
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]##*/}"
done
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
add a comment |
If I understand correctly, you want to make an array holding all the files and then display the contents of whichever file corresponds to the number entered by the user. If so, you are making things far more complicated than necessary. This should be enough:
## Get the files into the array $list
list=(/home/folder/list/*_log)
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]}";
done
## Get the user input
read -p "Number of file to be displayed:" numb
## display the file (don't use sudo unless absolutely necessary)
cat "${list[numb]}"
Note that this will display the file names including the entire path. To display the names only, change the for loop to:
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]##*/}"
done
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
add a comment |
If I understand correctly, you want to make an array holding all the files and then display the contents of whichever file corresponds to the number entered by the user. If so, you are making things far more complicated than necessary. This should be enough:
## Get the files into the array $list
list=(/home/folder/list/*_log)
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]}";
done
## Get the user input
read -p "Number of file to be displayed:" numb
## display the file (don't use sudo unless absolutely necessary)
cat "${list[numb]}"
Note that this will display the file names including the entire path. To display the names only, change the for loop to:
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]##*/}"
done
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
If I understand correctly, you want to make an array holding all the files and then display the contents of whichever file corresponds to the number entered by the user. If so, you are making things far more complicated than necessary. This should be enough:
## Get the files into the array $list
list=(/home/folder/list/*_log)
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]}";
done
## Get the user input
read -p "Number of file to be displayed:" numb
## display the file (don't use sudo unless absolutely necessary)
cat "${list[numb]}"
Note that this will display the file names including the entire path. To display the names only, change the for loop to:
## Display the file names
for i in ${!list[@]}; do
printf "%s: %sn" $i "${list[i]##*/}"
done
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
answered Dec 31 '18 at 9:34
terdon♦
128k31249423
128k31249423
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
add a comment |
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
Still the files aren't displayed however when i type a number i can view the file as I should be. Can't figure out why it won't display all the files though.
– User101
Dec 31 '18 at 10:03
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
@User101 I can't help if you don't give a specific example. I suggest you ask a new question and include the name of a file that doesn't work.
– terdon♦
Dec 31 '18 at 10:20
add a comment |
User101 is a new contributor. Be nice, and check out our Code of Conduct.
User101 is a new contributor. Be nice, and check out our Code of Conduct.
User101 is a new contributor. Be nice, and check out our Code of Conduct.
User101 is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f491721%2fdisplaying-files-and-increment-them-1%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
