Creating polygon from hole in QGIS?
I work with this polygon and try to find a way to create a new polygon from the empty gap in the middle of the polygon.
I succeed to do it with a "difference" tool- but used with another layer on the polygon and then using the difference tool.
I can also digitize the shape of the hole and create a new layer- i seeking an automated way to do it and not doing in manually.
I read
- "Clip" hole into Shapefile
- Create Polygon from holes in polygon ArcGIS
- How to fill in a ring polygon in QGIS 2.2?
Is it possible to do it with a direct tool in QGIS 2.18.1, without aid of another layer?
polygon qgis-2.18 create holes
edited 7 hours ago
PolyGeo♦
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
add a comment |
I work with this polygon and try to find a way to create a new polygon from the empty gap in the middle of the polygon.
I succeed to do it with a "difference" tool- but used with another layer on the polygon and then using the difference tool.
I can also digitize the shape of the hole and create a new layer- i seeking an automated way to do it and not doing in manually.
I read
- "Clip" hole into Shapefile
- Create Polygon from holes in polygon ArcGIS
- How to fill in a ring polygon in QGIS 2.2?
Is it possible to do it with a direct tool in QGIS 2.18.1, without aid of another layer?
polygon qgis-2.18 create holes
edited 7 hours ago
PolyGeo♦
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
for the whole layer
– newGIS
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago
add a comment |
I work with this polygon and try to find a way to create a new polygon from the empty gap in the middle of the polygon.
I succeed to do it with a "difference" tool- but used with another layer on the polygon and then using the difference tool.
I can also digitize the shape of the hole and create a new layer- i seeking an automated way to do it and not doing in manually.
I read
- "Clip" hole into Shapefile
- Create Polygon from holes in polygon ArcGIS
- How to fill in a ring polygon in QGIS 2.2?
Is it possible to do it with a direct tool in QGIS 2.18.1, without aid of another layer?
polygon qgis-2.18 create holes
edited 7 hours ago
PolyGeo♦
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
I work with this polygon and try to find a way to create a new polygon from the empty gap in the middle of the polygon.
I succeed to do it with a "difference" tool- but used with another layer on the polygon and then using the difference tool.
I can also digitize the shape of the hole and create a new layer- i seeking an automated way to do it and not doing in manually.
I read
- "Clip" hole into Shapefile
- Create Polygon from holes in polygon ArcGIS
- How to fill in a ring polygon in QGIS 2.2?
Is it possible to do it with a direct tool in QGIS 2.18.1, without aid of another layer?
polygon qgis-2.18 create holes
polygon qgis-2.18 create holes
edited 7 hours ago
PolyGeo♦
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
edited 7 hours ago
PolyGeo♦
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
edited 7 hours ago
PolyGeo♦
53.3k1779238
edited 7 hours ago
PolyGeo♦
53.3k1779238
edited 7 hours ago
PolyGeo♦
53.3k1779238
53.3k1779238
asked 19 hours ago
newGISnewGIS
1,83821246
asked 19 hours ago
newGISnewGIS
1,83821246
asked 19 hours ago
newGISnewGIS
1,83821246
1,83821246
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
for the whole layer
– newGIS
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago
add a comment |
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
for the whole layer
– newGIS
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
for the whole layer
– newGIS
18 hours ago
for the whole layer
– newGIS
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago
add a comment |
2 Answers
2
active
oldest
votes
I recommend Digitizing Tools plugin.
Once installed, you will find a new toolbar. The eighth from the left of this toolbar, there is an icon called Fill ring with a new feature (interactive).
For you to fill all rings at once;
- Switch to Fill all rings in selected polygons with new feature mode by clicking on a small triangle (right-hand-side).
- Start editing mode and select polygons you want to work on (you can select all polygons).
- Click on the tool icon.
- A small dialog box will appear and asks you to give a new attribute value. This value will be given all fillings, so that it helps you to identify these new features in the attribute table. Hit
[OK]to close.
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
add a comment |
You can use the trace tool (on the Snapping Toolbar) and simply trace around the hole in the polygon while creating a new feature in a new layer (or your existing layer).
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
|
show 2 more comments
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "79"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgis.stackexchange.com%2fquestions%2f308659%2fcreating-polygon-from-hole-in-qgis%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
I recommend Digitizing Tools plugin.
Once installed, you will find a new toolbar. The eighth from the left of this toolbar, there is an icon called Fill ring with a new feature (interactive).
For you to fill all rings at once;
- Switch to Fill all rings in selected polygons with new feature mode by clicking on a small triangle (right-hand-side).
- Start editing mode and select polygons you want to work on (you can select all polygons).
- Click on the tool icon.
- A small dialog box will appear and asks you to give a new attribute value. This value will be given all fillings, so that it helps you to identify these new features in the attribute table. Hit
[OK]to close.
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
add a comment |
I recommend Digitizing Tools plugin.
Once installed, you will find a new toolbar. The eighth from the left of this toolbar, there is an icon called Fill ring with a new feature (interactive).
For you to fill all rings at once;
- Switch to Fill all rings in selected polygons with new feature mode by clicking on a small triangle (right-hand-side).
- Start editing mode and select polygons you want to work on (you can select all polygons).
- Click on the tool icon.
- A small dialog box will appear and asks you to give a new attribute value. This value will be given all fillings, so that it helps you to identify these new features in the attribute table. Hit
[OK]to close.
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
add a comment |
I recommend Digitizing Tools plugin.
Once installed, you will find a new toolbar. The eighth from the left of this toolbar, there is an icon called Fill ring with a new feature (interactive).
For you to fill all rings at once;
- Switch to Fill all rings in selected polygons with new feature mode by clicking on a small triangle (right-hand-side).
- Start editing mode and select polygons you want to work on (you can select all polygons).
- Click on the tool icon.
- A small dialog box will appear and asks you to give a new attribute value. This value will be given all fillings, so that it helps you to identify these new features in the attribute table. Hit
[OK]to close.
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
I recommend Digitizing Tools plugin.
Once installed, you will find a new toolbar. The eighth from the left of this toolbar, there is an icon called Fill ring with a new feature (interactive).
For you to fill all rings at once;
- Switch to Fill all rings in selected polygons with new feature mode by clicking on a small triangle (right-hand-side).
- Start editing mode and select polygons you want to work on (you can select all polygons).
- Click on the tool icon.
- A small dialog box will appear and asks you to give a new attribute value. This value will be given all fillings, so that it helps you to identify these new features in the attribute table. Hit
[OK]to close.
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
answered 18 hours ago
KazuhitoKazuhito
14.6k31576
14.6k31576
add a comment |
add a comment |
You can use the trace tool (on the Snapping Toolbar) and simply trace around the hole in the polygon while creating a new feature in a new layer (or your existing layer).
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
|
show 2 more comments
You can use the trace tool (on the Snapping Toolbar) and simply trace around the hole in the polygon while creating a new feature in a new layer (or your existing layer).
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
|
show 2 more comments
You can use the trace tool (on the Snapping Toolbar) and simply trace around the hole in the polygon while creating a new feature in a new layer (or your existing layer).
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
You can use the trace tool (on the Snapping Toolbar) and simply trace around the hole in the polygon while creating a new feature in a new layer (or your existing layer).
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
answered 19 hours ago
Ian Turton♦Ian Turton
48k546111
48k546111
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
|
show 2 more comments
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
i don't want to digitize by manual- i search for automatic action.
– newGIS
19 hours ago
where the trace tool location?
– newGIS
16 hours ago
where the trace tool location?
– newGIS
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
on the Snapping toolbar - look at the one I have ringed in red
– Ian Turton♦
16 hours ago
your image is too small
– newGIS
16 hours ago
your image is too small
– newGIS
16 hours ago
1
1
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
it is a tool bar - so no not in plugins. Right click on a grey area and select it
– Ian Turton♦
14 hours ago
|
show 2 more comments
Thanks for contributing an answer to Geographic Information Systems Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fgis.stackexchange.com%2fquestions%2f308659%2fcreating-polygon-from-hole-in-qgis%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Manually for this one hole? Or for a whole layer with holes?
– Erik
18 hours ago
for the whole layer
– newGIS
18 hours ago
Possible duplicate of How to fill in a ring polygon in QGIS 2.2?
– Taras
18 hours ago