Are 52/34 chainrings compatible with an 11/32 11speed cassette
up vote
4
down vote
favorite
Im thinking of buying a Scott Addict 20 supplied with Ultegra 52/36 rings and 11 speed 11/30 cassette. Could I change this to 52/34 rings and 11/32 cassette?If not would 52/34 and 11/30 be a compatible combination?
cassette chainring compatibility
asked Nov 26 at 13:08
Old Codger
211
add a comment |
up vote
4
down vote
favorite
Im thinking of buying a Scott Addict 20 supplied with Ultegra 52/36 rings and 11 speed 11/30 cassette. Could I change this to 52/34 rings and 11/32 cassette?If not would 52/34 and 11/30 be a compatible combination?
cassette chainring compatibility
asked Nov 26 at 13:08
Old Codger
211
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
Im thinking of buying a Scott Addict 20 supplied with Ultegra 52/36 rings and 11 speed 11/30 cassette. Could I change this to 52/34 rings and 11/32 cassette?If not would 52/34 and 11/30 be a compatible combination?
cassette chainring compatibility
asked Nov 26 at 13:08
Old Codger
211
Im thinking of buying a Scott Addict 20 supplied with Ultegra 52/36 rings and 11 speed 11/30 cassette. Could I change this to 52/34 rings and 11/32 cassette?If not would 52/34 and 11/30 be a compatible combination?
cassette chainring compatibility
cassette chainring compatibility
asked Nov 26 at 13:08
Old Codger
211
asked Nov 26 at 13:08
Old Codger
211
asked Nov 26 at 13:08
Old Codger
211
asked Nov 26 at 13:08
Old Codger
211
asked Nov 26 at 13:08
Old Codger
211
211
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42
add a comment |
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42
add a comment |
2 Answers
2
active
oldest
votes
up vote
9
down vote
The combination of rings and sprockets you can use depends on the specs of the derailleurs, specifically the total capacity of both the front and rear derailleurs and the max sprocket size of the rear derailleur.
Front total capacity is just the max difference in size of the small and large chainrings, measured in teeth.
Rear total capacity is the max (difference in size small and large chainrings) + (difference in tsize small and large cassette sprockets), measured in teeth, and represents how much chain slack the derailleur can take up. You really do not want to exceed this as large-large rings sprocket combinations can damage the derailleur.
The Addict 20 comes with 105 R7000 series with a medium cage 'GS' rear derailleur. The front derailleur has 16t capacity which means you nominally can only have 52/36 or 50/34 chainring combinations.
The rear derailleur has a max sprocket size of 34t and total capacity of 39t so you could swap the 11-30 cassette for an 11-32 or 11-34.
Some people report that 52/34 is workable, and with a 11-30 or 11-32 cassette you would not exceed the TC of the rear derailleur.
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
add a comment |
up vote
3
down vote
Although Shimano advises against the 52/34 combination I've been using it on two different bikes* with 11-28 and 11-32 for over a year without any problems.
(*one with Ultegra Di2 and the other with 105)
answered Nov 26 at 13:27
Carel
3,4841812
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "126"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58260%2fare-52-34-chainrings-compatible-with-an-11-32-11speed-cassette%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
9
down vote
The combination of rings and sprockets you can use depends on the specs of the derailleurs, specifically the total capacity of both the front and rear derailleurs and the max sprocket size of the rear derailleur.
Front total capacity is just the max difference in size of the small and large chainrings, measured in teeth.
Rear total capacity is the max (difference in size small and large chainrings) + (difference in tsize small and large cassette sprockets), measured in teeth, and represents how much chain slack the derailleur can take up. You really do not want to exceed this as large-large rings sprocket combinations can damage the derailleur.
The Addict 20 comes with 105 R7000 series with a medium cage 'GS' rear derailleur. The front derailleur has 16t capacity which means you nominally can only have 52/36 or 50/34 chainring combinations.
The rear derailleur has a max sprocket size of 34t and total capacity of 39t so you could swap the 11-30 cassette for an 11-32 or 11-34.
Some people report that 52/34 is workable, and with a 11-30 or 11-32 cassette you would not exceed the TC of the rear derailleur.
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
add a comment |
up vote
9
down vote
The combination of rings and sprockets you can use depends on the specs of the derailleurs, specifically the total capacity of both the front and rear derailleurs and the max sprocket size of the rear derailleur.
Front total capacity is just the max difference in size of the small and large chainrings, measured in teeth.
Rear total capacity is the max (difference in size small and large chainrings) + (difference in tsize small and large cassette sprockets), measured in teeth, and represents how much chain slack the derailleur can take up. You really do not want to exceed this as large-large rings sprocket combinations can damage the derailleur.
The Addict 20 comes with 105 R7000 series with a medium cage 'GS' rear derailleur. The front derailleur has 16t capacity which means you nominally can only have 52/36 or 50/34 chainring combinations.
The rear derailleur has a max sprocket size of 34t and total capacity of 39t so you could swap the 11-30 cassette for an 11-32 or 11-34.
Some people report that 52/34 is workable, and with a 11-30 or 11-32 cassette you would not exceed the TC of the rear derailleur.
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
add a comment |
up vote
9
down vote
up vote
9
down vote
The combination of rings and sprockets you can use depends on the specs of the derailleurs, specifically the total capacity of both the front and rear derailleurs and the max sprocket size of the rear derailleur.
Front total capacity is just the max difference in size of the small and large chainrings, measured in teeth.
Rear total capacity is the max (difference in size small and large chainrings) + (difference in tsize small and large cassette sprockets), measured in teeth, and represents how much chain slack the derailleur can take up. You really do not want to exceed this as large-large rings sprocket combinations can damage the derailleur.
The Addict 20 comes with 105 R7000 series with a medium cage 'GS' rear derailleur. The front derailleur has 16t capacity which means you nominally can only have 52/36 or 50/34 chainring combinations.
The rear derailleur has a max sprocket size of 34t and total capacity of 39t so you could swap the 11-30 cassette for an 11-32 or 11-34.
Some people report that 52/34 is workable, and with a 11-30 or 11-32 cassette you would not exceed the TC of the rear derailleur.
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
The combination of rings and sprockets you can use depends on the specs of the derailleurs, specifically the total capacity of both the front and rear derailleurs and the max sprocket size of the rear derailleur.
Front total capacity is just the max difference in size of the small and large chainrings, measured in teeth.
Rear total capacity is the max (difference in size small and large chainrings) + (difference in tsize small and large cassette sprockets), measured in teeth, and represents how much chain slack the derailleur can take up. You really do not want to exceed this as large-large rings sprocket combinations can damage the derailleur.
The Addict 20 comes with 105 R7000 series with a medium cage 'GS' rear derailleur. The front derailleur has 16t capacity which means you nominally can only have 52/36 or 50/34 chainring combinations.
The rear derailleur has a max sprocket size of 34t and total capacity of 39t so you could swap the 11-30 cassette for an 11-32 or 11-34.
Some people report that 52/34 is workable, and with a 11-30 or 11-32 cassette you would not exceed the TC of the rear derailleur.
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
answered Nov 26 at 15:52
Argenti Apparatus
31.8k23481
31.8k23481
add a comment |
add a comment |
up vote
3
down vote
Although Shimano advises against the 52/34 combination I've been using it on two different bikes* with 11-28 and 11-32 for over a year without any problems.
(*one with Ultegra Di2 and the other with 105)
answered Nov 26 at 13:27
Carel
3,4841812
add a comment |
up vote
3
down vote
Although Shimano advises against the 52/34 combination I've been using it on two different bikes* with 11-28 and 11-32 for over a year without any problems.
(*one with Ultegra Di2 and the other with 105)
answered Nov 26 at 13:27
Carel
3,4841812
add a comment |
up vote
3
down vote
up vote
3
down vote
Although Shimano advises against the 52/34 combination I've been using it on two different bikes* with 11-28 and 11-32 for over a year without any problems.
(*one with Ultegra Di2 and the other with 105)
answered Nov 26 at 13:27
Carel
3,4841812
Although Shimano advises against the 52/34 combination I've been using it on two different bikes* with 11-28 and 11-32 for over a year without any problems.
(*one with Ultegra Di2 and the other with 105)
answered Nov 26 at 13:27
Carel
3,4841812
answered Nov 26 at 13:27
Carel
3,4841812
answered Nov 26 at 13:27
Carel
3,4841812
answered Nov 26 at 13:27
Carel
3,4841812
3,4841812
add a comment |
add a comment |
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58260%2fare-52-34-chainrings-compatible-with-an-11-32-11speed-cassette%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
The Addict 20 usually comes with 50/34 front rings (2018 and 2019) models. In earlier years a specific 'compact' version was available where the only difference was running a 50/34 front.
– Andy P
Nov 26 at 16:03
Thanks for your answers. Most appreciated.The bike in question is a 2019 Addict RC 20 and comes with Ultegra FCR 8000 components(Apologies for not providing full info) Sounds like I should be ok with the 11/32 cassette and might even get away with the 52/34 as well.
– Old Codger
Nov 26 at 20:42