Is it possible to reprogram wireless mouse receiver to receive signals from different mouse?
I have a Tecknet wireless Mouse which has a USB receiver. The exact make can be found on this link:
https://www.amazon.co.uk/TeckNet%C2%AE-Wireless-Buttons-Adjustment-Levels-Grey/dp/B001DHECXA/ref=sr_1_2?ie=UTF8&qid=1462006135&sr=8-2&keywords=mouse.
In fact I have two of these, but I have lost the mouse for one and the receiver for the other. So my question, is there a way to reprogram the mouse receiver to receive signals from the other mouse?
Thanks in advance.
wireless-mouse
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
add a comment |
I have a Tecknet wireless Mouse which has a USB receiver. The exact make can be found on this link:
https://www.amazon.co.uk/TeckNet%C2%AE-Wireless-Buttons-Adjustment-Levels-Grey/dp/B001DHECXA/ref=sr_1_2?ie=UTF8&qid=1462006135&sr=8-2&keywords=mouse.
In fact I have two of these, but I have lost the mouse for one and the receiver for the other. So my question, is there a way to reprogram the mouse receiver to receive signals from the other mouse?
Thanks in advance.
wireless-mouse
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24
add a comment |
I have a Tecknet wireless Mouse which has a USB receiver. The exact make can be found on this link:
https://www.amazon.co.uk/TeckNet%C2%AE-Wireless-Buttons-Adjustment-Levels-Grey/dp/B001DHECXA/ref=sr_1_2?ie=UTF8&qid=1462006135&sr=8-2&keywords=mouse.
In fact I have two of these, but I have lost the mouse for one and the receiver for the other. So my question, is there a way to reprogram the mouse receiver to receive signals from the other mouse?
Thanks in advance.
wireless-mouse
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
I have a Tecknet wireless Mouse which has a USB receiver. The exact make can be found on this link:
https://www.amazon.co.uk/TeckNet%C2%AE-Wireless-Buttons-Adjustment-Levels-Grey/dp/B001DHECXA/ref=sr_1_2?ie=UTF8&qid=1462006135&sr=8-2&keywords=mouse.
In fact I have two of these, but I have lost the mouse for one and the receiver for the other. So my question, is there a way to reprogram the mouse receiver to receive signals from the other mouse?
Thanks in advance.
wireless-mouse
wireless-mouse
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
asked Apr 30 '16 at 8:51
CiaranWelsh
2583412
2583412
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24
add a comment |
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24
add a comment |
2 Answers
2
active
oldest
votes
All the wireless peripherals I know of, including mice, have a button called "reset" or "connect" or something to that effect.
The mouse and the receiver are paired to each other from the factory, but that pairing might get lost due to battery loss or whatever. This is when the "connect" function would be useful. A mouse and/or a receiver wouldn't know that you're now wanting to connect a different but identical mouse, so that should work exactly as good.
If your mouse or receiver doesn't have a button on it (typically on the underside, or under the battery lid) then you're out of luck.
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
add a comment |
This is an old questions, but posting here for the sake of others who google this topic and get this page.
Microsoft has done a "very special" thing where they removed pairing buttons from most of their wireless devices and have factory-programmed transceivers to pair ONLY with one wireless device sample (mouse, keyboard, etc.).
Hence, if you lose the transceiver (or the mouse?) - you're out of luck, as the two are uniquely paired from the factory and there's no way to re-pair yourself.
Some people have had luck writing to Microsoft and asking for another receiver, but not many.
Otherwise - you've got a paperweight (albeit light).
answered May 7 at 17:19
Adam K.
1
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1071523%2fis-it-possible-to-reprogram-wireless-mouse-receiver-to-receive-signals-from-diff%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
All the wireless peripherals I know of, including mice, have a button called "reset" or "connect" or something to that effect.
The mouse and the receiver are paired to each other from the factory, but that pairing might get lost due to battery loss or whatever. This is when the "connect" function would be useful. A mouse and/or a receiver wouldn't know that you're now wanting to connect a different but identical mouse, so that should work exactly as good.
If your mouse or receiver doesn't have a button on it (typically on the underside, or under the battery lid) then you're out of luck.
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
add a comment |
All the wireless peripherals I know of, including mice, have a button called "reset" or "connect" or something to that effect.
The mouse and the receiver are paired to each other from the factory, but that pairing might get lost due to battery loss or whatever. This is when the "connect" function would be useful. A mouse and/or a receiver wouldn't know that you're now wanting to connect a different but identical mouse, so that should work exactly as good.
If your mouse or receiver doesn't have a button on it (typically on the underside, or under the battery lid) then you're out of luck.
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
add a comment |
All the wireless peripherals I know of, including mice, have a button called "reset" or "connect" or something to that effect.
The mouse and the receiver are paired to each other from the factory, but that pairing might get lost due to battery loss or whatever. This is when the "connect" function would be useful. A mouse and/or a receiver wouldn't know that you're now wanting to connect a different but identical mouse, so that should work exactly as good.
If your mouse or receiver doesn't have a button on it (typically on the underside, or under the battery lid) then you're out of luck.
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
All the wireless peripherals I know of, including mice, have a button called "reset" or "connect" or something to that effect.
The mouse and the receiver are paired to each other from the factory, but that pairing might get lost due to battery loss or whatever. This is when the "connect" function would be useful. A mouse and/or a receiver wouldn't know that you're now wanting to connect a different but identical mouse, so that should work exactly as good.
If your mouse or receiver doesn't have a button on it (typically on the underside, or under the battery lid) then you're out of luck.
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
answered Oct 6 '16 at 19:44
Torben Gundtofte-Bruun
11.4k3289130
11.4k3289130
add a comment |
add a comment |
This is an old questions, but posting here for the sake of others who google this topic and get this page.
Microsoft has done a "very special" thing where they removed pairing buttons from most of their wireless devices and have factory-programmed transceivers to pair ONLY with one wireless device sample (mouse, keyboard, etc.).
Hence, if you lose the transceiver (or the mouse?) - you're out of luck, as the two are uniquely paired from the factory and there's no way to re-pair yourself.
Some people have had luck writing to Microsoft and asking for another receiver, but not many.
Otherwise - you've got a paperweight (albeit light).
answered May 7 at 17:19
Adam K.
1
add a comment |
This is an old questions, but posting here for the sake of others who google this topic and get this page.
Microsoft has done a "very special" thing where they removed pairing buttons from most of their wireless devices and have factory-programmed transceivers to pair ONLY with one wireless device sample (mouse, keyboard, etc.).
Hence, if you lose the transceiver (or the mouse?) - you're out of luck, as the two are uniquely paired from the factory and there's no way to re-pair yourself.
Some people have had luck writing to Microsoft and asking for another receiver, but not many.
Otherwise - you've got a paperweight (albeit light).
answered May 7 at 17:19
Adam K.
1
add a comment |
This is an old questions, but posting here for the sake of others who google this topic and get this page.
Microsoft has done a "very special" thing where they removed pairing buttons from most of their wireless devices and have factory-programmed transceivers to pair ONLY with one wireless device sample (mouse, keyboard, etc.).
Hence, if you lose the transceiver (or the mouse?) - you're out of luck, as the two are uniquely paired from the factory and there's no way to re-pair yourself.
Some people have had luck writing to Microsoft and asking for another receiver, but not many.
Otherwise - you've got a paperweight (albeit light).
answered May 7 at 17:19
Adam K.
1
This is an old questions, but posting here for the sake of others who google this topic and get this page.
Microsoft has done a "very special" thing where they removed pairing buttons from most of their wireless devices and have factory-programmed transceivers to pair ONLY with one wireless device sample (mouse, keyboard, etc.).
Hence, if you lose the transceiver (or the mouse?) - you're out of luck, as the two are uniquely paired from the factory and there's no way to re-pair yourself.
Some people have had luck writing to Microsoft and asking for another receiver, but not many.
Otherwise - you've got a paperweight (albeit light).
answered May 7 at 17:19
Adam K.
1
answered May 7 at 17:19
Adam K.
1
answered May 7 at 17:19
Adam K.
1
answered May 7 at 17:19
Adam K.
1
1
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1071523%2fis-it-possible-to-reprogram-wireless-mouse-receiver-to-receive-signals-from-diff%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
To me it is odd that it wouldn't already do so. Weird thing to try: Remove the batteries , unplug the dongle , wait 20 seconds, plug it all back in, hope.
– Psycogeek
Apr 30 '16 at 16:15
No, unfortunately it didn't work. I don't know much about it but i assume they are set or different frequencies of something. Perhaps there is a way to sync them
– CiaranWelsh
Apr 30 '16 at 21:24